Plug LP 3/8" UNF
Original APEKS spare plug for LP port on 1st stage. Bright chromed. Plug thread 3/8" UNF.
7.30 EUR
Code: AP1408
Original APEKS spare plug for LP port on 1st stage. Bright chromed. Plug thread 3/8" UNF.
Original APEKS spare plug for HP port on 1st stage. Bright chromed. Plug thread 7/16" UNF.
Original APEKS spare plug for large LP port on 1st stage. Bright chromed. Plug thread 1/2" UNF.
The 2nd stage cover release tool is a very practical tool for servicing 2nd stage diving regulators. It is a cap made of silicone rubber...
Small and compact over pressure valve for medium pressure. From factory set for opening at 12-12,5Bar. Connecting thread is standard for...
DUX Spare screw for adjusting 2nd Stage Apeks regulators ATX, XTS. The screw is completly made from delrin. O-ring is enclosed.
Original APEKS Comfobite mouth piece- Antibacterial.
2nd stage part of quick disconnect AC990. Male part for spare 2nd stage. In case of needs you can connect second stage in to the AC990.
Light 90°L-bow for 2nd stage or rebreather. Manufactured from bras with chromed surface. Standard thread 9/16" for regulator hose...
With this adapter you can connect regulator with thread G5/8" to the tank with INT (Yoke) valve. INT valves still used in Asia and...
2nd stage swivel 360° can be easily installed between your existing second stage and LP hose. The second stage can rotate 360 degrees...
Apeks regulator bag made from robust water resistant material with additional padding to keep your regulators safe and protected during...
5th port upgrade kit for 1st stage XTX100 and XT200 generation II. This upgrade kit offer better hose routing for double tanks...
5th port upgrade kit for 1st stage DST. This upgrade kit offer better hose routing for double tanks configuration. Apeks recommend...
A practical adapter that allows you to connect two 1st stages of diving regulators to a cylinder with a 230Bar monovalve. The adapter is...
Very robust 90°L-bow for 2nd stage or rebreather. Manufactured from bras with chromed surface. Standard thread 9/16" for regulator...
A practical adapter that allows you to connect two 1st stages of diving regulators to a cylinder with a 300Bar monovalve. The adapter is...
With this adapter you can use any standard regulator hose with second stage Poseidon X-Stream (or any other with M31-1,5mm thread) With...
The perfect tool for hose replacement on dive trip. - Remove and replace the most common scuba hoses - 1/2”, 9/16”, 5/8” &...
Quick disconnect for 2nd stage, BOV, DSV or Full face mask. Equipped with locking nut preventing accidental disconnection. Standard...